Tabla de contenido
Idiomas disponibles
Idiomas disponibles
In order to avoid burns, always use the glove supplied with the apparatus when opening the
door and using the adjustment lever.
3.8 Tips for using your KRONOS cassette and OPTIMAL adjustment of the air intakes:
Once the unit has completed a first combustion cycle and it is hot enough, it is advisable to follow these
Recommendations to get the most out of your product.
Spread the embers from previous combustion cycles across the bottom of the burner.
It is preferable to use opened beech or similar wood with a humidity percentage of less than 20%.
Recommended fuel size:
Mod. Kronos 70 DC:
weight
Mod. Kronos 80 DC:
weight
Mod. Kronos 100 DC:
Regulate the primary air entry; opening it 5 to 8mm.
Regulate the secondary air entry; opening it 50%, meaning forming a 90º inclination with the device.
To obtain stable and optimal performance and a clear view of the flames through the glass try to make
consecutive loads of wood with pieces as similar as possible, for that you must keep the same air inlet regulation
at any time.
4. MAINTENANCE
To clean the glass, be careful to spray the cleaning product on a cloth and clean only the glass, without wetting
the rest of the door. Window-cleaners and special products often contain chemicals that attack the paint and the
ceramic fibre seals and cause oxidation of the metal parts.
It is very important not to wet the wood burner with window-cleaner, water or special cleaning products.
Heatproof paint is not waterproof.
Clean the paintwork with a feather duster or a soft, dry cloth. If over time you want to repaint the insert, the
manufacturer makes a spray paint available from your dealer.
5. RECOMMENDATIONS, CHIMNEY SWEEPING AND SECURITY NORMS
-
Periodically the chimney conduct and hood should be swept, and the device itself together with the
connections should be cleaned. All should be maintained clean and in a good state, as creosote build-up in
the chimney could cause fires.
-
Keeping the chimney conduct clean is of vital importance. The chimney should be cleaned periodically,
depending on the frequency of use and the type and humidity of the fuel used.
-
The maintenance of the appliance and the sweeping of the chimney should be done by a qualified
professional.
-
After a prolonged period of not using the device, the chimney should be checked to make sure it is not
blocked.
-
In case of chimney fire, immediately close the air inlets and use an extinguisher or call the fire department.
-
The stove will become very hot when you light it. Don't touch the stove without protection during firing and
for two hours after.
-
Warn children of the danger of burns.
-
Children or the infirm are not allowed to use the stove.
-
Do not modify the appliance without authorisation and use only original spare parts.
-
There should be adequate supply of air to the space where the stove is installed, both for combustion and
two pieces of beech wood of 30 - 45 centimetres in length and 0.7 to 1.2 kg.
two pieces of beech wood of 40 - 55 centimetres in length and 0.9 to 1.5 kg.
two pieces of beech wood of 45 - 65 centimetres in length and 1.2 to 2 kg. weight
29
Tabla de contenido
