Maintenance; Assembly Of Frames And Side Panels - Carbel A-70 Plus Manual De Montaje, Uso Y Mantenimiento

NB The power cable must be connected by a plug to a multi-socket adaptor and it must be accessible once the
appliance has been installed. The power cable or electrical components should only be changed or replaced
by qualified personnel to avoid hazards.

4 - MAINTENANCE

To clean the glass, be careful to spray the cleaning product on a cloth and clean only the glass, without wetting
the rest of the door. Window-cleaners and special products often contain chemicals that attack the paint and
the ceramic fibre seals and cause oxidation of the metal parts.
Clean the paintwork with a feather duster or a soft, dry cloth. If over time you want to repaint the insert, the
manufacturer makes a spray paint Available from your dealer.
window-cleaner, water or special cleaning products. Heatproof paint is not
waterproof.
Not to respect this guideline will invalidate the guarantee.
MAINTENANCE AND CLEANING OF THE VERMICULITE AND TERMATEK PARTS.
The parts made of vermiculite or refractory cement (Termatek) do not need to be cleaned: they should remain
clean as long as the firebox reaches high temperatures when functioning. (+/-400ºC)
Even though during the lighting phase the firebox might get dark or black, when the temperatures inside the
firebox rise, the colour of the refractory pieces should slowly get lighter again.
5 – ASSEMBLY OF FRAMES AND SIDE PANELS
The frame and the side panels are delivered unassembled, which is why it's important to follow the
instructions in order to install them correctly.
The frame is installed before the side panels
Warning.- It is very important not to wet the wood burner with
Página 28 de 41