Radio Data System Operations - Clarion CZ301E Manual De Instrucciones

Radio Operations
Recall the stored stations
Press one numeric button among 1 to 6 on the
panel to select the corresponding stored station.
Local seeking
When LOCAL seeking is on, only those radio
stations with strong radio signal could be
received.
To open or close LOCAL function, press and
hold the [ D ] button on the front panel, then
press [ ] button repeatedly until LO or
DX displays on the screen, and rotate the

Radio Data System Operations

Radio Data System
This unit has a built-in "Radio Data System"
decoder system that supports broadcast
stations transmitting "Radio Data System"
data.
When using the "Radio Data System"
function, always set the radio to FM mode.
AF function
The AF function switches to a different
frequency on the same network in order to
maintain optimum reception.
* The factory default setting is " ON ".
1. Set to system setup by long pressing [ D ]
button.
2. Press the [ ] or [
"AF".
3. Rotate the knob to select " ON " or " OFF ".
• ON:
"AF" indicator appears in the display and
AF function turns on.
• OFF:
"AF" indicator disappears in the display
and AF function turns off.
REG (Regional programme)
function
When the REG function is ON, the optimum
regional station can be received. When this
function is OFF, if the regional station area
] button to select
[VOLUME] knob to select Local or Distant
mode.
Note:
The number of radio stations that can be
received will decrease after the local seeking
mode is on.
switches as you drive, a regional station for
that region is received.
* The factory default setting is "ON".
Notes:
• This function is disabled when a national
station such as BBC R2 is being received.
• The REG function ON/OFF setting is valid
when the AF function is ON.
1. Set to system setup by long pressing [ D ]
button.
2. Press the [ ] or [
"REG".
3. Rotate the [VOLUME] knob to select
" ON" or " OFF".
Manually tuning a regional
station in the same network
This function is valid when the AF function is
ON and the REG function is OFF.
Note:
This function can be used when a regional
broadcast of the same network is received.
TA (Traffic Announcement)
In the TA standby mode, when a traffic
announcement broadcast starts, the traffic
announcement broadcast is received as top
priority regardless of the function mode so
you can listen to it. Traffic programme (TP)
automatic tuning is also available.
] button to select
11