Preparing The Aircraft - DJI Matrice 200 V2 Guia De Inicio Rapido

4. Preparing the Aircraft

Mounting the Landing Gear
Mounting the Propellers
Propellers without
silver rings should
be installed on
motors without
marks.
Mounting the Gimbal and Camera
1 1
Press the Gimbal
Detachment Button
to remove the cover.
Make sure to press down the gimbal detachment button when rotating the gimbal lock to remove the gimbal and camera. The gimbal lock should be
fully rotated when removing the gimbal for the next installation.
6
Unfolding the Aircraft
Unfold the frame arm, slide the arm lock to the end of the frame
arm, and rotate it about 90° until the silver line lies within the range
of the
2
Align the white and Rotate the gimbal lock
red dots and insert the to the locked position.
gimbal.
icon.
1
Press the propeller
down onto the
mounting plate and
rotate in the lock
direction until
secure.
Check that the propellers are
secure before each flight.
3
3
2
Propellers with silver
rings should be
installed on motors
with the same color
marks.