Orbegozo FO 1700 Manual De Instrucciones página 11

FO 1700 FO 2700 FO 3500
‐ Change the deteriorated or porous gas tubes and replace them before the expiry date indicated on the same
tube. The tubes must not be compressed, and must be installed so that they are not subject to any forces.
THEY MUST NOT come into contact with any hot part.
‐ All repairs and maintenance must be carried out by specialized personnel.
‐ Any modification or alteration could be dangerous.
ONLY TO BE USED OUTDOORS
The air required for combustion is 2.0 m3/h per every kW of nominal flow.
WARNING:
ACCESSIBLE PARTS CAN REACH VERY HIGH TEMPERATURES!
KEEP OUT OF CHILDREN'S REACH.
WARNING: after use, turn off the burner immediately.
IF YOU SMELL GAS:
‐ Turn off the burner
‐ Close the appliance gas supply (bottle tap)
‐ Contact your gas supplier or specialized personnel.
The support cannot be made of flammable materials and must resist a temperature of at least 90º C.
Warning: We advise you to check if your appliance has been properly installed. Also it is necessary to have
the appliance checked at least once a year to examine the state of the connection tube, taps, etc.
The manufacturer will not be held liable in the event of improper installation, or inadequate use of the
appliance.
WARNING: when the appliance is no longer in use, turn the burner off immediately.
FEATURES
1. Automatic electronic ignition. The gas is ignited by a spark from a special piezo-electric element. No
batteries or matches are needed.
2. Attractive top plate designed, made of stainless steel.
3. High-thermal heat and efficient burners
4. Large trivets. You can accommodate large pot and frying pan all at the same time.
5. Detachable burner cap for convenient cleaning and maintenance.
6. FO 1700: 1 big burner; FO 2700: 2 burners, big and medium; FO 3500, 3 burners, big, medium and small.
PREPARATION
1. When unpacked, make sure that all of the parts of the gas stove are included.
2. Match properly your gas cylinder and gas regulator.
3. Place your gas cooker on a level and firm location.
4. Install burners in their place, each burner fixes in hollow of its size.
5. Place the saucer trays on its place, fixing in its proper size.
6. Place the trivets on top the saucer trays.
11