flir E Serie Manual Del Usuario página 30

EN-US English
3. Pull the transparent tape to lift out the 3. Note the index marks on the lens
battery.
Mounting an additional
lens
1. Note the two indents on the front of
the lens and the corresponding tabs
on the lens cap.
2. Use the lens cap as a tool to remove
the plastic front of the lens. Rotate
the plastic front 30° degrees counter-
clockwise.
30
bayonet mount and on the
replacement lens.
4. Carefully push the lens into position.
5. Rotate the lens 30° clockwise.
To keep in mind
• Adjust the focus first. When the
camera is out of focus, the
measurement is wrong.
• By default, most cameras adapt the
scale automatically. Use this mode
first, but do not hesitate to set the
scale manually.
© 2011, FLIR Systems, Inc. All rights reserved worldwide.
Publ. no. T559524, rev. 008