Tabla de contenido
Idiomas disponibles
Idiomas disponibles
INSTRUCTIONS FOR USE
I. CONTENTS
I. Contents
D. Safety requirements
A. DESCRIPTION
The D 623 and D 625 holders consist of:
a) A clamp (ref. 1) a knob (ref. 2).
b) Two adjustable arms (ref. 3).
c) Water distributor with Hansen connectors
(ref. 4).
d) Protective cap (ref. 5) with 4+4 spare O-Ring
(ref. 6) and two hexagon keys (ref. 7) for locking
adjustable arms and water distributor.
e) Rigid Reserve support arm (ref. 8 - D 625 only).
f) Rigid Reserve fasten-up system (ref. 9 - D 625
only).
B. FUNCTIONAL FEATURES
The D 623 and D 625 holder functions are as fol-
lows:
a) Hold the LILLIPUT oxygenator in the right and
safe position. The D 623 is used only for closed
configurations, while the D 625 is also used for
open configurations.
b) Easily adjust to any circuit configuration.
c) Hermetically connect to the thermocirculator.
d) Enable LILLIPUT 360° rotation to decrease
tubing set length.
e) Permit water flow monitoring by means of an
indicator (ref. 10) located on the water outlet
connector (ref. 11).
C. INTENDED USE
The D 623 and D 625 holders must be used in
conjunction with LILLIPUT oxygenator only.
D. SAFETY INFORMATION
Information intended to attract the attention of the
user to potentially dangerous situations and to
ensure correct and safe use of the device is indica-
ted in the text in the following way:
WARNING
Indicates serious adverse reactions and potential
safety hazards for practitioner and/or patient that
can occur in the proper use or misuse of the devi-
ce, and also the limitations of use and the mea-
sures to be adopted in such cases.
Indicates any special care to be exercised by a
practitioner for the safe and effective use of the
device.
EXPLANATION OF THE SYMBOLS USED ON THE
LABELS
Batch code (number)
LOT
(reference for product traceability)
REF
Catalogue (code) number
The following is general safety information with the
aim of advising the operator in preparing to use the
device.
Also, specific safety information is given in the
instructions for use at locations in the text where
that information is relevant for correct operation.
WARNING
- The device must be used in accordance with the
instructions for use provided in this manual.
- The device is intended to be used by
professionally trained personnel.
- SORIN GROUP ITALIA is not responsible for
problems
arising
from
improper use.
- FRAGILE, handle with care.
- Do not expose to temperatures below 0°C
(32°F) or above 60°C (140°F).
- Provided that all the conditions mentioned at
paragraph G are respected, the product can be
endlessly reused. Do not dispose of it after use.
Before reusing the product, if necessary, clean
and disinfect it with alcohol.
- For further information and/or in case of
complaint contact SORIN GROUP ITALIA or the
authorised local representative.
E. SET-UP
Remove product from packaging.
WARNING
Visually inspect and carefully check the product
before use. Improper transportation an/or storage
may have damaged the product.
1
inexperience
or
Tabla de contenido
