Tile Mounting - Dedicated Micros Dennard 2060 Manual De Funcionamiento

8. Tile Mounting

255mm
A
Fig.12 Mounting disc attachment
Fig.11 Ceiling hole pattern
Cut/drill hole pattern in tile as shown in (fig.11).
Attach the mounting disc to the dome as shown in (fig.12) using 3 of the existing M4 dome hd. self
tapping trilobular screws, that attach the hemisphere to the dome (item A).
Offer dome complete with attached mounting disc (item B) up to the hole in the tile from beneath
and clamp to tile using 2 off split clamp rings (items C) from above.
Secure mounting disc with 4 off M6 soc button hd. fixings (supplied) (item D) as shown in (fig.13).
Fit safety bond supplied (item E) to an attachment point in ceiling.
C
B
E
F
D
Fig.13 Mounting to tile (ceiling)
Fig.14 Split bezel mounting
Note: For use with soffit mount the split clamp ring needs to be fixed into position using 4 off M4 pan hd. self
tapping fixings (supplied) (item F) (fig.14).
Dennard 2060 Operation Manual Page. 7