Dennard 2060 (Fixed Attitude Dome Camera)
1.
Hemisphere removal
6 x fixing screws
Dennard 2060 Operation Manual
2.
Camera pan adjustment
Inner hemisphere
Moving cameras can be positioned remotely, fixed
attitude modules require manual adjustment to
position the camera. Follow the procedure below
to set-up your required picture frame.
1. Unscrew the 6 fixings securing the outer
hemisphere to the casing and remove.
2. To adjust the pan position of the camera, grip the
inner hemisphere and rotate. This adjustment
provides 180º of pan right & left movement. Tip. Do
not wind more than 180º in one direction as this will
stress the connections to the camera.
3. To adjust the tilt position grip the camera platform
(accessible through the camera viewing slot) as
shown and move. This adjustment provides tilt
up/down. See Addendum 3 for 'zoom cam' set-up.
3.
Camera tilt adjustment
Addendum 1