Dome Mounting - Dedicated Micros Dennard 2060 Manual De Funcionamiento

9. Dome Mounting

A
C
Fig.15 Mounting dome to bracket
A. Secure & hang dome to bracket by attaching safety bond carbine to eyelet, as shown.
B Mate central connector supplying power & control to dome. (Ensure power is off when
connecting).
C. Lift dome to bracket flange ensuring head of screws (previously fitted M6x16 Trilobular self
tapping screws) pass through keyhole slots. Twist to locate.
D. Tighten 4 top mounting fixings with 4mm A/F Hexagonal key supplied to secure, finally secure
plasic cover to metal pins on bracket flange .
Dennard 2060 Operation Manual
B
D
Page. 8