Trevi TT 1068 E Manual De Usuario página 16

ENGLISH
5. When the usb or sd icon stops flashing, it means that the folder copying is completed.
Iii) Copy all track
1. Insert the usb/sd storage media, press cd button to "cd" mode.
2. Press rec button, then "one" wll be flashing on the display. Press skip up / skip down button to select "all" on the display. Press rec button
again to confirm.
3. Usb or sd will be flashing on the display. Copying is performing now.
4. When the usb icon stops flashing, it means that all track copying is completed.
Split Track Functio
1) Manual split operation procedure: during usb/sd recording, the usb/sd icon will flash on the display. If a new track is required, press mode button
on the unit or remote control, display will show "ts", then the unit will stop recording momentarily and resume again. A new file will have been
created on the usb/sd device represnting a new track.
2) Auto split operation procedure:
- Before usb/sd recording, select audio source, then press mode button on the unit or remote control, display will show "t-on", which means the
auto split function has activated. Then start usb/sd recording, the unit can automatically detect the silent part between each track, and create a
new file to move on to start recording the next track.
- If not required: press mode button on the unit or remote control before usb/sd recording, display will show "t-of", which means auto split has
been deactivated.
- Please note for auto split: several seconds of the beginning of the next track may not be recorded, as the unit may take a few seconds to create
a new file on the usb/sd; and it can additionally be the case that some music producers intentionally add silent sections within one track. As a
result, this will very likely make the unit consider this silent part the break between tracks and create a new track on the recording.
- Note for auto split: during usb/sd recording from turntable , when the unit has detected any particular silent part, the turntable / player will stop
momentarily. The turntable player will resume operation once the usb/sd device has begun creating a new file to be recorded.
Bluetootooth Connection
- This unit have bluetooth function, which can connect and play music from your bluetooh device (such as mobile phone).
- Press and hold funct button on the remote control till display shows "bt" (or repeatedly press aux button on the unit to switch "bt" & "aux" mode
on display), then bt indicator (blue color) will be flashing, it means the unit is ready for connection with your bluetooh device.
- Switch on the bluetooth function of your bluetooh device, and select "TT 1068 E" bluetooth equipment for connection.
- After your bluetooh device is connected with the unit, bt indicator (blue color) will stay on, then start to playback your device.
Earphone Jack & Line Out Socket
- This system can be connected with headphone or external amplifier / speaker by 3.5Mm earphone jack.
- This system can be connected with external device (eg. Amplifier and speaker) by line-out socket at rear cabinet.
Power Saving Feature:
To save energy, if there is no audio signal from cd / turntable / usb / sd for a period of over 10 minutes, then the unit will automatically switch to
standby mode
Technical Specifications
Power supply:
consumption:
Standby:
Reception frequency:
Reception frequency:
Transmitting power max Bt:
Bluetooth transmission band:
Unit dimensions:
16
12V 1A power supply with 100-240V ~ 50 / 60Hz power supply
15W
<1W
FM 87.5 - 108.0 MHz
AM 522 - 1620 KHz
2.5 mW
2.4 GHz
315x330x165 mm
TT 1068 E