ALPIDEX 16161 Manual De Instrucciones página 16

board, press down from the middle, and ideally use a roller (or a spoon) to brush
out any air bubbles. Allow the board to dry for 24 hours before filling it with air
again so that the glue can cure completely.
12. Attaching kayak seat
The kayak seat is optionally available and an ideal way to use your SUP comfortab-
ly as a kayak. At the back of the backrest of the seat there are several straps with
4 carabiners. Use the 4 D-rings in the middle of the board to fix the seat. Simply
click the 2 carabiners of the upper straps into the two front D-rings of the board
(near the carrying loop), and the lower 2 carabiners into the two rear D-rings (see
illustrations above). Tighten the straps slightly so that the kayak seat is optimally
positioned.
16
We wish you a lot of fun with stand up paddling!