Tabla de contenido
VIDEOPORTERO DIGITAL -
Programme the connection brackets/
telephones from the main entrance panel
(Look up in the technical datasheet that
comes with the connection bracket/
telephone).
/
(
Adjust the video unit's view angle until
getting the desired orientation.
11
Close the panel, press it against the
flush-mounted box and fix it to this
using the clamping screws.
,
/
.
Adjust the volume level on the entrance panel
and on the monitors/telephones (1). If there is
acoustic feedback, adjust the feedback control
(
) (2) (Feature available on certain models
only). It is also possible to regulate the volume
of the beep (3).
10
Separate the upper and lower decorative
fittings, by loosening the clamping
screws.
12
Tighten the upper and lower decorative
fittings.
/
(1).
(2)
D-001
,
Tabla de contenido
