Idiomas disponibles
Idiomas disponibles
INSTRUCTIONS FOR USE
TIMING TOOLS FOR 0.9 TWINAIR FIAT
Application
Brand
Fiat
Lancia
Components
Ref.
Beta code
A
VN 006
B
VN 007
C
VN 008
D
A
Safety Precautions - Please read
• Disconnect the battery earth leads (check radio code is available)
• Remove spark or glow plugs to make the engine turn easier
• Do not use cleaning fluids on belts, sprockets or rollers
• Always make a note of the route of the auxiliary drive belt before removal
• Turn the engine in the normal direction (clockwise unless stated otherwise)
• Do not turn the camshaft, crankshaft or diesel injection pump once the timing chain has been
removed (unlessspecifically stated)
• Do not use the timing chain to lock the engine when slackening or tightening crankshaft pulley bolts
• Do not turn the crankshaft or camshaft when the timing belt/chain has been removed
• Mark the direction of the chain before removing
• It is always recommended to turn the engine slowly, by hand and to re-check the camshaft and
crankshaft timing positions.
• Crankshafts and Camshafts may only be turned with the chain drive mechanism fully installed.
• Do not turn crankshaft via camshaft or other gears
• Check the diesel injection pump timing after replacing the chain
• Observe all tightening torques
• Always refer to the vehicle manufacturer's service manual or a suitable proprietary instruction book
• Incorrect or out of phase engine timing can result in damage to the valves
• It is always recommended to turn the engine slowly, by hand, and to re-check the camshaft and
crankshaft timing positions
4
Model
500, Panda, Punto (2012)
Ypsilon
OEM code
2 000 035 100
2 000 035 300
2 000 035 200
B
Engine
0.9 Twinair Turbo
Description
Camshaft locking plate
Flywheel locking pin
Pulley locking pin
Screws TCCE 8x25
C
EN
Engine code
312A2.000
D
