Ce Declaration Of Conformity - Facom E.2015 Manual Original

MAINTENANCE
Your power tool has been designed to operate over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool care and regular cleaning.
. Lubrication
Your power tool requires no additional lubrication.
. Cleaning
Blow dirt and dust out of the main housing with dry air as often as dirt is seen collecting in and around the
air vents.
WARNING: Never use solvents or other harsh chemicals for cleaning the non-metallic parts of the tool. Use
a cloth dampened only with water and mild soap. Never let any liquid get inside the tool; never immerse any
part of the tool into a liquid.
Accessories
.
E.2002B1
E.2002B3
. Optional Accessories
E.2002B2
E.2002B4
Only FACOM, recommended accessories should be used with this product.
Consult your dealer for further information on the appropriate accessories.
Separate collection of used products and packaging allows materials to be recycled and used again.
Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw
materials.
DISPOSAL OF THIS ARTICLE
Dear Customer, If you at some point intend to dispose of this article, then please keep in mind that many
of its components consist of valuable materials, which can be recycled.
Please do not discharge it in the garbage bin, but check with your local council for recycling facilities in
your area.
WE, FACOM S.A.S., 6/8 RUE GUSTAVE EIFFEL - BP 99 - 91 423 MORANGIS CEDEX FRANCE, DECLARE UNDER
OUR OWN RESPONSIBILITY THAT THE PRODUCT E.2015 – FACOM HEAT GUN
- IS IN CONFORMITY WITH THE «MACHINERY» DIRECTIVE 2006/42/CE
- AND IS IN CONFORMITY WITH THE PROVISIONS OF THE HARMONISED EUROPEAN STANDARD
EN 60335-1
EN 60335-2-45
NU-E.2015_1114.indd 9
Distribution nozzle
Reflector nozzle
Cross-flow nozzle
Concentrator nozzle

CE DECLARATION OF CONFORMITY

2004/108/EC
11.12.2014
FACOM QUALITY MANAGER
6/8/2015 1:52:04 PM