Zoeller 2701 Manual De Instrucciones página 9

13. Attach power supply cord and switch cord to discharge
pipe using cable or zip ties (not included) to allow the
float switch to move freely.
14. Plug power supply cord into piggyback switch cord.
Connect piggyback switch cord to a receptacle
protected by a ground fault circuit interruptor (GFCI).
15. Fill the basin with water to check operation. The pump
will start when the water level has reached the switch
"on" level.
13
14
15
On
9
Cable or
zip tie
GFCI
protected
receptacle