Tabla de contenido
Idiomas disponibles
Idiomas disponibles
8
Settings
Enter your personal information before us-
ing the scale.
Setting the time and unit of mea-
sure
From standby mode (time displayed),
press the [SET] button. The display flas-
hes.
Set the date, time and measuring unit
(KG, LB, ST) one after the other by
pressing the
Confirm each entry by pressing the
[SET] button.
These settings allow you to use the soft-
ware to meaningful effect.
Setting user data
You must enter personal user parameters in
order to measure your body fat percentage
and other physical data.
The scale has 10 user memory locations
which allows, for example, you and your
family members to save personal settings
and retrieve them later.
Degrees of activity
Selection of the degree of activity must refer
to the medium and long term.
Degree of
Physical activity
activity
1
None.
2
Low: A small amount of light physical effort (e.g. short walks, light garden work,
gymnastic exercises).
3
Medium: Physical effort for 30 minutes at least 2 to 4 times a week.
4
High: Physical effort for 30 minutes at least 4 to 6 times a week.
5
Very high: Intensive physical effort, intensive training or hard physical work for at
least one hour daily.
or
buttons.
Press the [ON] button.
Wait until the display shows "0.0".
Press the [SET] button to start changing
the settings. The first memory position
flashes on the display.
Now you can enter the following set-
tings:
User data
Memory position
Body height
Age
Sex
Degree of activity
Modifying values: Press
and hold for more rapid progress.
Confirming entries: Press the [SET] but-
ton.
The scale is now ready for measurement.
The scale switches off automatically if no
other actions are performed.
All parameters must be entered before the
body fat and other values can be entered.
Parameters
1 to 10
100 to 220 cm
(3’' 03" to 7‘' 03")
10 to 100 years
male ,
female
1 to 5
or
or press
25
Capítulos
Tabla de contenido
