Upper Roller Springs - Nogueira EN-9F3B Manual De Instrucciones

Upper roller springs

The upper roller spring of your Ensiling machine is equipped with an articulation system with side
springs to facilitate the entrance of the material easier; this is to guarantee uniform and precision
cutting. If the machine displays problems in the entrance of material, check the pressure of the
springs. Proceed as follows in order to increase the spring pressure:
models:
Pull the pin up to another position.
Important!
28
models:
fig.59
Place the two pins in the upper holes.
Replace flaccid or damaged springs immediately.
Instruction manual
fig.60