Care and Maintenance
Service
Regular servicing by a Minebea Intec technician will extend the service life of
your equipment and ensure its continued weighing accuracy. Minebea Intec
offers its customers service contracts with regular maintenance intervals ranging
from one month to two years. The frequency of the maintenance intervals
depends on the operating conditions and the operator's tolerance requirements.
Repairs
Disconnect the power supply to the defective equipment immediately (unplug
3
the power cord from the mains supply). Repair work must be performed by
authorized Minebea Intec service technicians using original spare parts. Repairs
performed by untrained persons may result in considerable hazards for the user.
If a cable or cable gland is damaged or defective, replace the cable as a complete
3
unit with all its connectors.
3
Do not open the indicator while it is carrying current. Wait at least 10 seconds
after disconnecting it from power before beginning to open the equipment.
Proper fitting of all surfaces is essential for the IP rating of the housing; for this
reason the device must be opened and closed by a certified technician.
Cleaning
Indicators are designed in compliance with European Hygienic Equipment
Design Group (EHEDG) directives on suitable measures to avoid contamination,
so that they are particularly easy to clean and disinfect.
Disconnect the power supply to the indicator (unplug the power cord from the
3
mains supply). If necessary, disconnect the data cable.
Make sure that no liquid enters the indicator.
3
Do not use aggressive cleaning agents (solvents or similar agents).
3
Do not spray the device with water or blow with compressed air.
3
Clean the indicator with a cloth lightly moistened with a soap solution.
t
For use in the food industry, use a cleaning agent suitable for that particular
working environment.
Wipe the indicator with a soft, dry cloth.
t
Care and Maintenance
Installationsanleitung CAIXS2
11