TOPDON BT500P Manual Del Usuario página 9

Cautions
Use this tester in accordance with these instructions, taking into account the working
conditions and the work to be performed. Hazardous results could occur if tool is used
for purposes not intended.
Before testing, make sure the battery terminals are clean. Grease and dust could result
in inaccurate test results.
Wear eye protection when working around batteries.
Check the insulation layer of the battery clamps is in good condition (no damage,
bareness or disconnection) to avoid electric shock.
Test in a well-ventilated area. Vehicle exhaust contains toxic carbon monoxide.
Keep hair, hands, and clothing as well as tester leads and cords away from moving
blades and belts.
Keep the tester out of the reach of children.
FAQ
Q : Is BT500P able to test vehicle alternator?
A : BT500P can test alternator.
Q : Is BT500P able to test motorcycle batteries?
A : It can test 12V/24V battery, between 100 and 1700 CCA. If the motorcycle battery is
lead-acid battery within these values, then yes.
Q : How to set the CCA range?
A : You can set the data near to the CCA standard number of your battery.
Q : Can the fi rmware be updated?
A : BT500P is a basic tool, so a fi rmware update would not be needed.
Q : Does it test 12V/24V deep cycle batteries?
A : Yes, it does.
Q : Will BT500P work on motorcycle charging systems?
A : It works on a 12V/24V system and the CCA range is between 100-1700.
Q : Will this tester work with marine batteries?
A : Yes, it can work with marine batteries.
Q : Will this accurately load test ATV batteries?
A : Yes, it can accurately load test ATV batteries.
Q : What does SOH, SOC, and BAT mean?
A : The SOH refers to the "State of health". The SOC is the "State of charge" and the BAT is
the "resistance value" of the battery.
14
Español