TOPDON BT500P Manual Del Usuario página 6

5) Press the "▲" or "▼" button to set the value (marked on the vehicle battery).
6) After setting all values, press "ENTER" to test. Test result will display as below.
3. Cranking Test
3.1 Before Test
The engine and all other accessory loads must be OFF during test in order to have
accurate results.
3.2 Steps
1) Select the "2. START-UP LOAD" on the main menu.
2) Press "ENTER" to test. On the display is "CURRENT VOLT: 12.36V", instant
minimum starting volt "INST-VOLT: 12.30V", and standard "INST-VOLT: 9.6V" (for 24V
batteries it will be 16V).
8
3) Explanation for cranking test results.
Please refer to the chart below to confi rm the test results.
Reference Table (for 12V battery)
Cranking Cranking
Voltage 12V Voltage 24V
>10.6V >21.1V
10V~10.5V 20.0V~21.0V
9.6V~9.9V 19.2V~19.9V
<9.5V <19.1V
4. Max Work Load Test
4.1 Before Test
The engine must be ON during test.
4.2 Steps
1) Select the "3. MAX WORK LOAD" test on the main menu.
2) Press "ENTER", and turn on loads and speed up to 2000-2500rpm.
Discharge
Actions
Performance
Good No Action Needed
Not Bad Recharging
Bad Replace
Very Bad Replace ASAP
9