Component List; Technical Data - KRESS KUB60 Manual Del Usuario

q) Retain the original product literature for
future reference.
r) Remove the battery from the equipment
when not in use.
s) Dispose of properly.
t) Do not mix cells of different manufacture,
capacity, size or type within a device.
u) Do not remove battery pack from its
original packaging until required for use.
v) Observe the plus (+) and minus (–) marks
on the battery and ensure correct use.
SYMBOL
To reduce the risk of injury, user must
read instruction manual
Wear eye protection
Wear ear protection
Wear dust mask
8
Do not burn
EN
Batteries may enter water cycle if
disposed improperly, which can be
hazardous for ecosystem. Do not
dispose of waste batteries as unsorted
municipal waste.
Li-Ion battery. This product has been
marked with a symbol relating to
'separate collection' for all battery
packs and battery pack. It will then
Li-I on
be recycled or dismantled in order to
reduce the impact on the environment.
Battery packs can be hazardous for the
environment and for human health since
they contain hazardous substances.
Wear protective gloves.
Screwdriving
Don't touch the machine if it overheats
Lock
High speed
Low speed
Waste electrical products must not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your local authorities or
retailer for recycling advice.

COMPONENT LIST

1. FORWARD/ REVERSE ROTATION CONTROL
2. SOFT GRIP HANDLE
3. HOOK
4. BATTERY PACK RELEASE BUTTON
5. BATTERY PACK
6. ON/OFF SWITCH
7. VARIABLE 3-SPEED CONTROL BUTTON
8. LED LIGHT
9. 50MM SCREWDRIVER BIT (PH2)*
10. BATTERY CAPACITY INDICATOR
11. COLLET LOCKING SLEEVE
* Not all the accessories illustrated or
described are included in standard delivery.

TECHNICAL DATA

Type KUB60 KUB60.2 KUB60.91 (B60-
designation of machinery, representative of
screwdriver or impact wrench)
Model No.
Voltage
No-load speed
Impact rate
Max torque
Chuck size
KUB60
KUB60.91
KUB60.2
20V Max**
I：0-900 /min
II：0-2400/min
III：0-3000/min
I: 0-1200bpm
II: 0-3300bpm
III: 0-4000bpm
230 N.m
1/4" (6.35mm)