Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Next steps
Replace the system
cover.
Installing the system cover
Prerequisites
1. Follow the safety guidelines listed in the
Safety
instructions.
2. Follow the procedure listed in
Antes de trabajar en el interior de su
equipo.
3. Ensure that all internal cables are connected and routed properly, and no tools or extra parts are left inside the system.
Steps
1. Align the tabs on the system cover with the guide slots on the system.
2. Close the system cover release latch.
3. Using a 1/4-inch flat head or Phillips 2 screwdriver, rotate the lock clockwise to the lock position.
Figure 21. Installing the system cover for Rear Accessed configuration
34
Instalación y extracción de componentes del sistema
Tabla de contenido
