Operation; Selecting The Video Source - Stryker SIDNE 0240020925 Guia Del Usuario

Operation

The SIDNE® Voice Upgrade Package allows devices connected to SIDNE to
be controlled by commands issued through the microphone headset. SIDNE
provides both audio and visual feedback to acknowledge commands. Visual
feedback appears on the operating room monitor when the microphone headset
is used.
Note

Selecting the Video Source

In order to display the camera image properly, SIDNE® must know where
the camera has been connected. Use the SIDNE tablet, Switchpoint Infinity
touchscreen, or the microphone headset to tell SIDNE which video input port
the camera is connected to.
1. To select the video source by using the microphone headset:
• Say "SIDNE®. "
• Say "Options" (after Options has appeared on the monitor).
• Say "Source" (after Source has appeared on the monitor).
• Say the name of the video input port the camera is connected to
(after it has appeared on the monitor).
2. To select the video source by using the tablet:
• Press the Options icon on the tablet screen.
• Press the icon that corresponds with the video source (input port)
the camera is connected to.
3. To select the video source by using the Switchpoint Infinity:
• Press the Options icon on the touchscreen.
• Press the icon that corresponds with the video source (input port)
the camera is connected to.
20
All devices connected to the SIDNE system can still be
operated by their front-panel controls as well as the SIDNE
Tablet or Infinity Switchpoint touchscreen. These methods of
control will continue to be available even if the SIDNE voice
upgrade cartridge is disconnected.