Tabla de contenido
Idiomas disponibles
Idiomas disponibles
It is only possible to work safely with
this product if you read these operating
instructions and the safety instructions
in their entirety and strictly follow the
information given.
• For your own safety wear safety glasses or
goggles (enclosed on the sides) and safety
gloves.
• Pay attention to the information and the instruc-
tions on work procedures provided by the
vehicle manufacturer on the replacement of
vehicle windscreens.
• Before any use, check that all parts are in
working order, especially the suction plates
and their sealing surfaces, vacuum pumps and
the ratchet mechanism.
• Continually monitor the ring markings of the
vacuum pumps. Only if an adequate vacuum
exists is the windscreen removal device held
securely against the screen.
Pos.
Art.
0714 58 229
1
0714 58 282
2
0714 58 283
3
0714 58 219
4
5
0714 58 214
0714 58 213
6
Spare parts
0714 58 234
0714 58 237
0714 58 238
0714 58 227
Not all of the accessories illustrated and described are included as standard.
BDA_Scheibenaustrenn-Set_Basic.indd 9
For Your Safety
Description
Windscreen removal device
Square cutting wire 50 m 0.6 mm
Separating cutting wire 25 m
Acrylic glass protector
Attachment hook
Wire probe for pulling in the cutting wire
Orsy 100 case
Ratchet unit
Spool with holder
Ratchet mechanism
Suction plate with pump
• If possible where windscreens have large
cracks, try not to place the suction plates on a
crack. The vacuum can leak away on cracks so
that the device falls off.
• If nevertheless the device does indeed come
loose from the windscreen, protect yourself and
the vehicle though appropriate preventive
actions, see preparation for work.
• Generally the cutting wire is under very high
tension. Always expect and be prepared for
the sudden snapping of the cutting wire and
use it only once.
• Only use original spare parts and Würth
cutting wire.
• Do not make any design changes to the indi-
vidual parts.
Set contents
1
1
1
1
1
1
9
11.09.14 17:34
Tabla de contenido
