Tool Specifications; Intended Use; Initial Operation; Setting The Operating Mode - Würth H 22-SLE Traducción Del Manual De Instrucciones De Servicio Original

Rotary Hammer
Article number
Rated power input
Impact frequency at rated speed
Impact energy per stroke according
to EPTA-Procedure 05/2009
Rated speed
Tool holder
Spindle collar diameter
Drilling diameter, max.
– Concrete
– Brickwork (with core bit)
– Steel
– Wood
Weight
Class of protection

Intended Use

The machine is intended for hammer drilling in con-
crete, brick and stone. It is also suitable for drilling with-
out impact in wood, metal, ceramic and plastic.
For damage caused by usage other than intended, the
user is responsible.
Symbols
Read all safety warnings and all
instructions
Warning
Before any work on the machine itself,
pull the mains plug.

Tool Specifications

H 22-SLE
5708 200 X
700 W
-1
0–4500 min
2.2 J
-1
0–1250 min
SDS-plus
43 mm
22 mm
68 mm
13 mm
30 mm
2.4 kg
II

Setting the operating mode

The operating mode of the power tool is selected with
the mode selector switch 1.
To change the operating mode, push the release but-
ton and turn the mode selector switch 1 to the
requested position until it can be heard to latch.
Note: Change the operating mode only when the
machine is switched off! Otherwise, the machine can
be damaged.
H 24-MLE
5708 201 X
750 W
-1
0–4500 min
2.4 J
-1
0–1250 min
SDS-plus
43 mm
24 mm
68 mm
13 mm
30 mm
2.5 kg
II

Initial Operation

Position for hammer drill-
ing in concrete or stone
Position for drilling without
impact in wood, metal,
ceramic and plastic
(H 24-MLE Position for changing the posi-
H 24-MLS) tion of the chisel
The mode selector switch 1
does not latch in this position.
(H 24-MLE Position for chiselling
H 24-MLS)
H 24-MLS
5708 202 X
750 W
-1
0–4500 min
2.4 J
-1
0–1250 min
SDS-plus
43 mm
24 mm
68 mm
13 mm
30 mm
2.6 kg
II
12