Johnson Controls ANSUL CHECKFIRE 210 Guia Del Propietario página 9

FRONT PANEL INDICATORS (Continued)
STEP 2 (Continued)
c. LED amber or red indications
!
Amber: RELEASE Circuit Fault,
Red:
Amber: DETECTION Circuit Fault,
Red*:
Amber: ISOLATE Mode, pulsing 2 x 30 sec.
Red:
* Australian Standard: Only active when "Pressure Switch
Feedback" is programmed.
pulsing 1 x 10 sec.
DETECTION Circuit Alarm Condition,
pulsing 1 x 10 sec
pulsing Amber 1 x 10 sec.
System DISCHARGE activated pressure
switch, steady-on for remaining Release
Activated.
Pulsing 1 x 10 sec. during Post Release
Activated
SHUTDOWN status, pulsing 4 x 1 sec.
during Alarm Condition.
Steady-on during Release Activated.
Pulsing 1 x 10 sec. during Post Release
Activated.
PAGE 5
009290