LED indication
Function
HBS-730 Status
Power on
Power off
Pairing mode
Operating
Headset / hands-free
profile connected
Call connected
Charging
Charging
Charging complete
Troubleshooting
Issue
Possible problem
Check whether the battery
Does not turn on
of the HBS-730 is fully
charged.
Check whether the
handset supports the
Unable to
headset or hands-free
communicate with
Bluetooth profiles.
the LG Bluetooth
®
Headset HBS-730
Check whether the battery
of the HBS-730 is low.
Check and make sure the
headset is on.
Unable to pair the
HBS-730 with the
Check and make sure
Bluetooth
®
device
the headset is placed in
pairing mode.
Low sound
Check the speaker
(speaker)
volume.
8
Action
The blue LED light flickers 4 times.
The blue LED light flickers 4 times and then
turns off.
The blue LED light stays on.
The blue LED light flickers 2 times every 5
seconds.
The blue LED light flickers 2 times every 5
seconds.
The red LED stays on.
LED turns off.
Resolution
Charge the battery.
Determine whether your
handset supports the headset
or hands-free Bluetooth
profiles.
Charge the battery.
Slide the Power switch to
the 'ON' side to turn on the
headset.
With the power off, press the
CALL button and move the
Power switch to the 'ON' side
at the same time for 1 second
to manually place the headset
in pairing mode.
lncrease the volume level.
Do not drop the unit from high places.
Do not modify, repair, or take apart.
Do not expose directly to water, alcohol, benzene, etc. for cleaning.
Do not expose directly to flammables.
Do not place or keep the unit near flammables.
Keep unit away from humidity & dust.
Do not place heavy objects on the unit.
Only use the headset with an original LG charger, otherwise it may be damaged.
• Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
• There is a risk of explosion if the battery is replaced by an incorrect type.
• Dispose of used batteries according to the instructions.
• The neck strap is made of a shape memory alloy. However, bending the neck strap
repeatedly is not recommended.
FCC NOTICE TO USERS :
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
IMPORTANT NOTE :
To comply with the FCC RF exposure compliance requirements, no change to the
antenna or the device is permitted. Any change to the antenna or the device could result
in the device exceeding the RF exposure requirements and void user's authority to
operate the device.
CE NOTICE TO USERS :
Hereby, LG Electronics Inc. declares that this HBS-730 is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
Precautions
Declaration of Confirmation
FCC ID: BEJHBS730
9