Kathrein DVB-S(2)-COFDM Manual Del Usuario página 25

1.14.2 Transport stream ID (TSID) and original network
ID (ONID)
As the data rate of a COFDM-modulated transport stream is normally lower than the data rate of the received transport stream, it may
be necessary to distribute the services of an individual transport stream at the input to several transport streams at the output. In their
search mode some receivers do then not detect all channels that were originally compiled in the original transport stream. In this case
they require the "TSID" transport stream ID to be adjusted and/or "ONID" original network ID.
Note: The TSID and the ONID are 16-bit numbers. A transport stream can be differentiated from all other transport
streams in a DVB-T system by a unique combination of TSID and ONID. For DVB the ONID normally describes
the original location of a transport streams.
Menus are available for editing the TSID and the ONID. The values can be modifi ed by selecting the corresponding "orig" entry using
the "<" or ">" buttons and set to the "edit" value by using the "+" or "-" buttons. The current values of the TSID and ONID from the
processed transport stream are displayed in hexadecimal notation. In the "edit" setting you can modify the values of the corresponding
IDs. To do this, select the value using the ">" button. Use the "+" or "-" key to change the current value in ± 1 increments. Alternatively
you can also select numeric setting mode by pressing the
or "-" keys in ± 1 increments. All IDs should be entered in hexadecimal format. Possible values are "00h" to "FFh" for the OID and
"0000h" to "FFFFh" for the TSID and the ONID.
Note: Only experienced users should modify the TSID or ONID. If several channels (services) of a SAT transport
stream are distributed to multiple COFDM transport streams, it is possible that the receiver cannot automatically
detect all channels because in this case the uniqueness of the TSID / ONID pair is lost. In this case please
proceed as follows:
• Preferably the ONID should be modifi ed. If possible, set it to a value between FF00h and FFEEh. This range
is reserved for private use and is not used by public network operators.
• If the channel search is unsuccessful despite the ONID adjustment, the TSID can be modifi ed.
Please ensure that all TSIDs in a system are adjusted to guarantee uniqueness for each transport stream.
This sub-menu can be exited only when the cursor is on the "OID" parameter. To do this, use the "<" and ">" buttons to select "OID" and
press the "Sub-menu" button
Note: Modifying the TSID and the ONID requires that the channel fi lter is active.
1.15 Conditional Access with it CI retrofi t kit
(only if CI retrofi t kit fi tted)
The UFZ 394 CI retrofi t kit (200610097) can be fi tted to enable decoding of encrypted channels. Fitting is described in the
documentation.
If the UFZ 394 CI retrofi t kit is fi tted, the software detects this automatically and modifi es the menu contents accordingly.
E1 1236
27.500 MS/s
Outp. S21
8 MHz
The transport stream processor "TP" is selected using the "<" and ">" buttons and the sub-menu is called up using the "Sub-menu"
button . If the UFZ 394 CI retrofi t kit is detected, the "CI" parameter will appear.
"CI" is selected using the "<" and ">" buttons and the sub-menu below is called up using the "Sub-menu" button
to return to the main menu.
MHz
3/4
306.00
QAM64
Main Menu
button. In numeric mode each digit can be modifi ed by pressing the "+"
***
TP
QPSK Filter
MHz IDs
Back
11 / 14
UFO333MX
62%/76%
CI
"Transport stream processor" sub-menu
***
.