Kathrein DVB-S(2)-COFDM Manual Del Usuario página 23

The channel multiplex "fi lter" is selected using the "<" and ">" buttons.
*** UFO333MX
Filter
IDs
Back
"Transport stream processor" sub-menu
To process the channel list for the channel fi lter, press the "Sub-menu" button
This reads in the current channel table from the transponder. A progress bar appears while this is done.
As soon as the channel unit has successfully determined this information, the sub-menu for adjustment is displayed.
If a CI retrofi t kit is fi tted an additional parameter is shown in the second line, see also the next chapter.
*** UFO333MX
E1 /T / 001 /
Das Erste
Compile
"Filter" sub-menu
The fi rst line shows the type of the programme that was selected, together with the number of the channel and the number of channels
on the transponder.
T = TV channel
Channel no. (e.g. 001)
of the selected channel
The second line shows the channel name, together with its fi lter status (+ or -).
The default setting for the status of the channels that are displayed is "-", i.e. no channels are transmitted when the channel fi lter is
switched on, but the channel list is not being processed.
The "Compile" button in the third line starts the compilation of the channel list, which then becomes effective.
The selection of the channels carried over is performed using the "+" and "-" buttons, where the status "+" means the channel will be
carried over and the status "-" means it will be removed. The "Status" parameter is selected using the "<" and ">" buttons.
The settings become effective when the fi lter table is compiled. This is done using the "<" and ">" buttons; select the "Compile"
parameter and use the "+" or "-" buttons to initiate the compilation of the channel table.
*** UFO333MX
T / 001 /
Das Erste
Compile
"Filter" sub-menu
0% / 0%
009
/
R = Radio channel
/ Quantity (e.g. 009)
of the channels in the transponder
009
/
***
□ □ □
When changing to the "Filter" sub-menu
*** ***
E1 /T /
-
Das Erste
Compile
D = Data service
***
-
□ □ □
9 / 14
Programme
information
is read in
....
on the "Filter" parameter in the channel fi lter.
UFO333MX
001 / 009
"Filter" sub-menu
Channel fi lter
being compiled
....
On compiling the channel fi lter
***
/ -