Assembly; Making The Electrical Connections - HAMPTON BAY RIVERWALK 91142 Guía De Uso Y Mantenimiento

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Assembly - Hanging the Fan
2
Hanging the fan
WARNING: The hook (MM) is only to balance the fan while
making the electrical connections. Failure to hang as shown
may result in the hook (MM) breaking, causing the fan to
fall. The hook must pass from the inside to the outside of the
canopy.
WARNING: When hanging the fan on the hook (MM) it is
critical that you use one of the non-slotted (round) holes in
the canopy (C).
Carefully lift the fan-motor assembly (D) up to the slide-on
mounting bracket (A).
Insert the ball portion of the ball/downrod assembly into the
socket of the slide-on mounting bracket.
Turn the ball/downrod assembly clockwise until it is seated
with the tab of the slide-on mounting bracket aligned with the
slot in the ball.
If using close-to-ceiling mounting, hang the fan on the hook
provided by utilizing one of the round holes at the outer rim of
the ceiling canopy (C).
Assembly - Hanging the Fan (continued)
3

Making the electrical connections

WARNING: Each wire not supplied with this fan is designed to
accept up to one 12-gauge house wire and two wires from the
fan. If you have larger than 12-gauge house wiring or more
than one house wire to connect to the fan wiring, consult an
electrician for the proper size wire nuts to use.
WARNING: Remove the rubber motor stops on the bottom of the
fan before installing the blades or testing the motor.
IMPORTANT: Use the plastic wire connectors (AA) supplied with
your fan. Secure the connectors with electrical tape and ensure
there are no loose strands or connections.
NOTE: The fan comes with 30 in. lead wires for use with an
extended ball/downrod assembly. If using the 4.5 in. ball/downrod
assembly (B) provided, you can cut the lead wires to your desired
length (no shorter than 12 in.).
The fan comes with 30 in. lead wires for use with an extended
ball/downrod assembly. If using the 4.5 in. ball/downrod
assembly (B) provided, you can cut the lead wires to your desired
length (no shorter than 12 in.) This will make extra room in the
canopy (C), if you do not wish to cut the wires, you will need to
neatly wrap them.
Spread the wires apart so that the green and white wires are on
the side of outlet box and the black wire is on the other side.
Connect the fan motor green wires to the household green or
bare wire using a wire connecting nut (AA).
Connect the fan motor white wire to the household white wire
using a wire connecting nut (AA).
Standard mount
Connect the fan motor black and blue wires to the household black
wire using a wire connecting nut (AA).
Secure each wire connecting nut using electrical tape.
Turn the black wire connecting nut upward to one side of the outlet
box (OO), turn the green and white wire connecting nuts upward on
the other side, press the wires into the outlet box (OO).
White Green
Black
Black
Blue & Black White Green
9
Please contact 1-855-HD-HAMPTON for further assistance.
A
B
C
K
D
Close to ceiling mount
A
C
K
D
Outlet box
in the ceiling(OO)
White
Green or bare wire
HAMPTONBAY.COM

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Riverwalk 911471002 707 9551002 707 953

Tabla de contenido