Display Elements; Using The Thermocouple(S) - SKF TKDT 10 Instrucciones De Uso

ООО "Индастриал Партнер"
Авторизованный дистрибьютор SKF

5. Display Elements

1. Setup Mode
2. Offset correction
3. Frozen readings
4. Auto Power Off enabled
5. Top display:
T1, T2, T1-T2
6. Temperature units

6. Using the thermocouple(s)

1. Plug the thermocouple(s) into the T1 and/or T2 input connector(s).
2. Press
Enter
After 1 second the thermometer displays the irst reading.
If no thermocouple is plugged into the selected input or the
thermocouple is "open," the display shows "- - - -".
SKF TKDT 10
www.skf.indpart.ru
1
12
11
to turn on the thermometer.
Техническая поддержка:
[email protected], 8(495)223-07-69
2 3 4
7. Bottom display: MAX, MIN, AVG,
T1 or T2 readings
8. MAX, MIN, AVG display
9. Time Stamp
10. Min:sec or hour:min
11. Thermocouple
type K
12. Low battery symbol
[email protected]
8(495)223-07-69
5
6
7
8
9
10
7