Samsung RF263BEAE Serie Manual Del Usuario página 19

1. Allow your refrigerator to operate and cool
down for 24 hours (or 1 full day).
- Waiting 24 hours will allow your ice maker to
cool properly.
2. Dispense 4 to 6 ice cubes into the glass.
3. After 8, and then 16 hours, dispense a full
glass of ice.
• When you press the Test button, you will hear
the refrigerator chime (ding-dong). When the
chime sounds, release the Test button.
• The chime sounds automatically again to let
you know the ice maker is working well.
If you want to remove the ice cubes without
using the ice bucket, please turn the ice
CAUTION
cover from the ice maker.) The ice cubes in
the ice maker can spill out over the drawer.
Do not put food in the ice bucket. If you store
food in the ice bucket, the food may get in the
CAUTION
way of the ice maker while opening/closing
the door, causing damage to the ice maker.
Note that the ice cubes in the ice bucket
may spill out over the drawer when
CAUTION
removing the ice bucket from the drawer.
If this is the case, be sure to clear the ice
cubes that spilled out of the drawer.
If a power failure occurs, ice cubes may
melt then freeze together when the power
CAUTION
comes back on, causing the dispenser to
be out of order.
To prevent this problem, after a power failure, pull
out the ice bucket and discard the residual ice or
water.
If you use all the ice at once, you must
repeat Steps 2 and 3 on the previous page.
However, only wait 8 hours before dispensing the
fi rst 4 to 6 ice cubes. This will replenish the ice
cubes and ensure maximum ice production.
cubes from the bucket. If you are not using the ice
DA68-02615A(0.0).indb 19
dispenser, the ice cubes may clump together.
Remove bucket as arrow direction. Throw away
the ice cubes or clumped ice. Push the bottom of
the bucket until you hear a click. When the bucket
does not fi t, turn the helix by 90 degree and degree
and try again.
Use only the ice maker provided with
the refrigerator. The water supply to
CAUTION
this refrigerator must only be installed/
connected by a suitably qualifi ed person.
Connect to a potable water supply only.
To operate the ice maker properly, water pressure
of 138~862 kPa is required.
If you have a long vacation or business trip and
won't use the water or ice dispensers for a long
time:
- Close the water valve. Otherwise, water
leakage may occur.
- Remove all food.
- Unplug the refrigerator.
- Wipe excess moisture from inside and leave
the doors open. Otherwise, odor and mold
may develop. Do not put your fi ngers, hands
or any other unsuitable objects in the chute or
ice-maker bucket.
- It may result in personal injury or material
damage. Never put your fi nger or any other
objects in the dispenser opening.
- It may cause injury.
Do not try to disassemble the ice maker.
Do not wash or spray the ice bucket with water
while it is in the refrigerator. Remove it to clean
it.
When you insert the Ice maker tray, be
sure that the tray is well centered at the
CAUTION
entrance.
Otherwise, the tray may be stuck.
Water clouding phenomenon
All water provided to the refrigerator fl ows
through the core fi lter which is an alkaline
water fi lter. In the fi ltering process, the
pressure of the water that has fl owed out
of the fi lter is increased, and the water
becomes saturated with oxygen and
nitrogen. When this water fl ows out into
the air, the pressure plummets and the
oxygen and nitrogen get supersaturated,
which results in gas bubbles. The water
may temporarily look misty or cloudy due
to these oxygen bubbles. After a few
seconds, the water will look clear.
operating _19
2012.7.11 8:41:26 PM