Changing The Water Filter - Samsung RF263BEAE Serie Manual Del Usuario

( 8 ) Filter Water fi lter usage
This icon will light up when you need to
change the fi lter. After you use about
300 gallons of water, the fi lter indicator
lights up. (about 6 months).
The icon will blink red for several seconds
when you open or close the door.
After you install the new water fi lter, reset
the fi lter indicator by touching the Alarm/
hold 3 sec for Filter Reset button.
• If water is not dispensing or
dispensing slowly, you need to
replace the water fi lter because
the water fi lter is clogged.
• Some areas have large amounts
of lime in their water, which
causes the water fi lter to clog
more quickly.

CHANGING THE WATER FILTER

To reduce risk of water damage to your
property DO NOT use generic brands
WARNING
of water fi lters in your SAMSUNG
Refrigerator.
USE ONLY SAMSUNG BRAND WATER FILTER.
SAMSUNG will not be legally responsible for any
damage, including, but not limited to property
damage caused by water leakage from use of a
generic water fi lter. SAMSUNG Refrigerators are
designed to work ONLY WITH SAMSUNG Water
Filter.
The Filter light turns red to let you
know when it is time to change your
water fi lter cartridge.
To give you time to get a new fi lter,
the red light comes on just before the
capacity of the current fi lter runs out.
Changing the fi lter on time provides you with the
freshest, cleanest water from your refrigerator.
1. Shut off the water supply. Then, turn the water
fi lter ( 1 ) about 1/4 turn, counter-clockwise.
2. Pull the water fi lter (
16_ operating
DA68-02615A(0.0).indb 16
(Red)
1 ) from the case fi lter ( 2 ).
2
1
• To change the water fi lter more easily,
shut off the water supply valve.
• S o m t e m i s e t i , s i h a d r o t
fi lter because impurities in the water cause it
to stick. If you are having diffi culties, grip the
water fi lter fi rmly and pull it hard.
• W h e n o y u p l l u h t e
water fi lter, a little
water can leak from
the opening. This is
normal. To minimize
the water leaks, keep the fi lter cartridge
horizontal when you pull it.
• To prevent overfl ow, empty the water fi lter tray
( 3 ) and dry around the fi lter case ( 2 ).
. 3 Insert the new fi lter into the fi lter case ( 4
4. Push the fi lter, and then turn it clockwise until it
locks.
• If you have trouble inserting the water
fi lter because of high water pressure,
shut off the water supply valve.
• The locked symbol should be lined up
with the indicator line.
5. Touch the "Ice Type/Water
Hold 3 sec for Filter Reset
button ( ) for
(Filter Reset)
about 3 seconds to reset
the water fi lter. The color of
indicator ( ) changes from red to off.
6. If you turned off the water supply, turn it back
on.
For a replacement water fi lter, you can
visit your local home Improvement center
or contact the Samsung Parts distributor.
Be sure the replacement water fi lter has
the SAMSUNG logo on the box and
on the water fi lter. Link : http://www.
samsungparts.com
d s i s a e s m b e l h t e w t a r e
2
3
).
4
"
2012.7.11 8:41:21 PM