Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Installation
1
Determining the mounting
location
1.1 For towel ring and paper holder
Determine the location where you wish to install
your accessory.
Place the mounting brackets (AA) at the desired
location and mark the installation holes using a
pencil.
1.2 For towel bar
Tape the template to the wall with masking tape
and ensure it is completely level
Use a level to determine the location where you
want to install your accessory.
AA
2
Drilling the pilot hole
2.1 For towel ring and paper holder
Pre-drill a pilot hole with a small drill.
2.2 For towel bar
Safety Information
If installing into ceramic tile, before attempting
to drill through ceramic tile, the following must
be done:
Using a center punch, very lightly and carefully
tap the spot where you wish to drill to break the
shiny glass.
4
Tabla de contenido
