Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

TOOLS REQUIRED
Phillips
Electric drill
screwdriver
Installation
1
Determining the mounting
location
Determine the location where you wish to
install your accessory.
Place the mounting bracket at the desired
location and mark the installation holes
using a pencil.
Pencil
Claw
hammer
2
Installing the bracket in
drywall
Drill a 1/8 in. pilot hole at each pencil
mark made.
Drive the E-Z Ancor
into the wall using
®
a Phillips screwdriver until flush with
the wall.
Align the mounting brackets with the E-Z
Ancor
and secure with the mounting
®
screws.
NOTE: To install the bracket in a wood stud,
proceed to Step 3. To install the bracket in
ceramic tile, proceed to Step 4.
1
USE AND CARE GUIDE
HARDWARE INCLUDED
E-Z Ancor
x4
Mounting bracket x2
®
Hex wrench x1
Set screw x2
3
Installing the bracket in a
wood stud
Drill a 3/32 in. pilot hole at each pencil
mark made.
Align the mounting brackets with pilot
holes and secure with the mounting
screws.
Please contact 1-855-434-5224 for further assistance.
Item #591-205
596-776
Model #BTB01100RW
BTB01200RW
TOWEL BAR
Mounting screw x4
HOMEDEPOT.COM
Tabla de contenido
loading

Resumen de contenidos para Glacier bay BTB01100RW

  • Página 5: Herramientas Requeridas

    Núm. de artículo 591-205 596-776 Núm. de modelo BTB01100RW BTB01200RW GUÍA DE USO Y CUIDADO TOALLERO-BARRAL HERRAMIENTAS REQUERIDAS SE INCLUYE LOS HARRAJES E-Z Ancor Soporte de montaje x2 Tornillo de montaje x4 ® Llave hexagonal x1 Tornillo de presión x2...
  • Página 6: Información De Seguridad

    Garantía Los productos de Glacier Bay están fabricados con normas y mano de obra de calidad superior y están respaldados por nuestra garantía de por vida limitada. Los productos de Glacier Bay están garantizados al comprador consumidor original de estar libres de defectos en materiales o mano de obra.

Este manual también es adecuado para:

Btb01200rw591-205596-776

Tabla de contenido