Tripp-Lite SRCOOLNET2 Guía De Instalación E Inicio Rápido página 9

Installation
4-5
Remove Configuration Cable: Remove the configuration cable that connects
the SRCOOLNET2 to the computer.
5 - Test and Configure
5-1
Test Network Connection: After an IP address has been assigned to the
SRCOOLNET2, try to access it with a Web browser that supports Java™. Open a
Web browser on a computer connected to the LAN and enter the SRCOOLNET2's
IP address. The user name is localadmin and the default password is localadmin.
After you enter the user name and password, the PowerAlert Status page will
appear in the browser window. For more information about configuration and
operation of the managed device, refer to the Owner's Manual, available for
download at www.tripplite.com.
Note: When using the SRCOOLNET2 with the SRCOOL7KRM or SRCOOL18K, do
not use the cooling unit's manual control panel.
15-02-247-93342E.indb 9
9
4/9/2015 9:52:08 AM