Tripp-Lite SRCOOLNET2 Guía De Instalación E Inicio Rápido página 8

Installation
IPv6 address
8c:1
Network prefix length [64]?
IPv6 gateway
DNS server [8.8.8.8]?
This card's host name [poweralert-0641576753151]?
This card's domain []?
For each of the remaining questions, you can press <Return> to select the
value shown in braces, or you can enter a new value. Tripp Lite recommends
against changing the default settings unless you are an advanced user with a
specific purpose.
After you have finished entering settings, the SRCOOLNET2 will save changes to
NV memory and reboot (this may take several minutes).
Saving the changes in NV memory...Done.
After the SRCOOLNET2 reboots, the initialization page should display the new
static IP settings.
PLATFORM: trippliteSnmpCard9210_H_16_32 16M/32M
------------------------------------------------------------------------------
NETWORK INTERFACE PARAMETERS:
FQDN poweralert-0641576753151
IP address on LAN is 192.168.1.2
LAN interface's subnet mask is 255.255.255.0
IP address of default gateway to other networks is 192.168.1.1
IPv6 static address on LAN is FD36:A66D:8C61:8E65:19AF:94E9:D88C:1 prefixlen 64
IPv6 gateway on LAN is FD36:A66D:8C61:8E65::1
DNS server is 8.8.8.8
Time is supplied by SNTP at an interval of 360 minutes
Primary SNTP Server host is 0.pool.ntp.org
Secondary SNTP Server host is 1.pool.ntp.org
Time zone is set to -6:00 from GMT, DST Enabled
15-02-247-93342E.indb 8
[2001:DB8::1:58:4F43:4849:544C]? fd36:a66d:8c61:8e65:19af:94e9:d8
[::]? fd36:a66d:8c61:8e65::1
8
4/9/2015 9:52:08 AM