Tripp-Lite SRCOOLNET2 Guía De Instalación E Inicio Rápido página 3

Installation
3 - Dynamic IP Address Assignment
Connect SRCOOLNET2 to Network: By default, the SRCOOLNET2 will attempt
3-1
to obtain an IP address via DHCP . This may take as long as several minutes,
depending on your network environment.
Discover IP Address: Contact your network administrator to determine which IP
3-2
address has been assigned to the SRCOOLNET2 by the DHCP server. The card
can be identified on the DHCP server by referring to its MAC address (see Step
1-2 ). You may wish to request a long-term lease period for the IP address,
depending on your application. After you have discovered the IP address,
proceed to 5 - Test and Configure.
Note: If you prefer, you can determine the DHCP address during boot-up.
Connect a computer running a terminal emulation program to the SRCOOLNET2
using the configuration cable and reset the SRCOOLNET2.
15-02-247-93342E.indb 3
3
4/9/2015 9:52:07 AM