Tripp-Lite SRCOOLNET2 Guía De Instalación E Inicio Rápido página 4

Installation
4 - Static IP Address Assignment/Terminal Menu
Configuration Settings
Determine IP Information: Before assigning a static IP address, you'll need to
4-1
know the IP address, gateway address and subnet mask. If you do not have this
information, contact your network administrator for assistance.
4-2
Connect SRCOOLNET2 to Computer: Use the included mini-DIN to DB9
configuration cable (part number 73-1025) to connect the SRCOOLNET2 to the
computer. The circular connector
8-pin mini-DIN serial port (labeled CONFIG)
connector carefully to avoid damaging the pins). The DB9 connector
other end of the cable connects to the computer's serial port
Figure 1
SRCOOL7KRM
15-02-247-93342E.indb 4
A at one end of the cable attaches to the
A
B
OR
SRCOOL18K
B on the SRCOOLNET2 (align the
A
B
4
C at the
D .
C
D
4/9/2015 9:52:08 AM