Warning Messages - Agilent Technologies TwisTorr 305-IC Manual De Instrucciones

Warning messages

MESSAGE DESCRIPTION
CK_RTC_RESET Real Time Clock malfunction
A1 A1 Accessory Output shut down
THERMALFAIL due to its overtemperature
protection intervention
B1 B1 Accessory Output shut down
THERMALFAIL due to its overtemperature
protection intervention
DO1 DO1 Digital Output shut down
THERMALFAIL due to its overtemperature
protection intervention
DO2 DO2 Digital Output shut down
THERMALFAIL due to its overtemperature
protection intervention
V24VDC +24VDC OUTPUT (V+), too high
WARNING load condition applied to the
UNDERVOLTAGE output
ANALOGOUT AO1 Analog Output, too high
OUT TOLL load condition applied to the
output
TwisTorr 305-IC User Manual / 87-901-058-01 (A.00)
ACTION
Contact Agilent to get the appropriate
directions
Power off the unit in order to allow it to
cool down quickly.
Remove all the loads which are applied
to the output; check the loads electrical
ratings (they have match with the output
specifications); check the loads for short
circuits absence/lack of insulation
Power on the unit, without any load, the
yellow led light must be turned off
if YES, reconnect the load
If NO, contact Agilent to get the
appropriate directions
Power off the unit.
Remove all the loads which are applied
to the output; check for the loads
electrical ratings (they have to match
with the output specifications); check for
the loads absnce of short circuits/lack
of insulation
Power on the unit, without any load
connected to the output; the yellow led
light must be turned off immediately
if YES, reconnect the load
If NO, contact Agilent to get the
appropriate directions
Remove all the loads which are applied
to the output; the yellow led light must
be turned off immediately
if YES, before reconnecting the load to
the output, check it for its electrical
ratings (they have to match with the
output specifications) and check it for
the absence of short circuits/lack of
insulation
If NO, contact Agilent to get the
appropriate directions
Technical Information
Warning messages
LED STATUS (for ref)
Red Yellow
OFF/ON ON, Blinking/Flashing/
Solid Solid Inv.Flashing/Solid
OFF/ON ON, Blinking/Flashing/
Solid Solid Inv.Flashing/Solid
OFF/ON ON, Blinking/Flashing/
Solid Solid Inv.Flashing/Solid
OFF/ON ON, Blinking/Flashing/
Solid Solid Inv.Flashing/Solid
OFF/ON ON, Blinking/Flashing/
Solid Solid Inv.Flashing/Solid
OFF/ON ON, Blinking/Flashing/
Solid Solid Inv.Flashing/Solid
OFF/ON ON, Blinking/Flashing/
Solid Solid Inv.Flashing/Solid
293/302
8
Green