Acoem OneProd Eagle Manual Del Usuario página 7

2.5. P
RIMARY CELL
Caution: Risk of explosion if battery is replaced with an incorrect type. Dispose of used batteries according to the manufacturer's instructions.
Only use SAFT LS33600 3.6 V primary lithium-thionyl chloride (Li-SOCl
Use of any other battery may cause risks of explosion
CAUTION: The battery must be installed in the direction indicated by the polarity symbol.
Only replace the primary cell in a safe area.
WARNING: Risk of exposure exists in case of mechanical, electrical or thermal abuse.
Accordingly, do not short circuit, recharge, incinerate, puncture, crush, immerse in any liquids,
force discharge, heat above the operating temperature range of the product or solder directly to
the cell. In such instances, there is risk of fire, explosion and burn hazard.
2.6. S
TORAGE
The storage area should be clean, cool (not exceeding +25°C [+77°F]), dry and ventilated.
Storage at high temperature will lead to accelerated degradation of the primary cell.
CAUTION: Do not leave EAGLE devices exposed to a heat source or high temperature location, such as an unattended vehicle. To prevent damage, remove the devices from the
vehicle.
2.7. T
RANSPORTATION
For transportation, follow procedure UN3091 (cells and batteries contained in equipment or
packed with it) for Class 9 Miscellaneous Dangerous Goods and use UN Identification Number
labels that are clearly visible on the outer packaging.
Primary cell must be transported inside the sensors or expanders.
Li metal in cell (g)
Net Cell Mass
UN Number
Packing Group
D.C Class
Figure 2 : Polarity symbol
Table 3: Primary cell information for transportation
4.5 g [0.16 oz]
90 g [3.17 oz]
UN 3091
(cells and batteries contained in equipment or packed with it)
ll
Section IA Class 9
) D-size bobbin cell
2
Brand of ACOEM
7