Device Controls And Indicators; Storage, Handling And Removal Instructions; Storage And Handling; Removal Instruction - AMATECH F-AHTMAQ3 Manual De Instrucciones

INSTRUCTIONS FOR USE
c. Adjust the screw until the measurement
from the bumper to the clamp is:
0.26" (0.6 cm) for the C-Max Table.
0.875" (2.2 cm) for the Alpha Star Table.
Trim outer rubber covers as needed.
Repeat procedure for other side.
setscrews in place with supplied Loctite.

3.3 Device controls and indicators:

Controls and indicators of this device are described within the Setup instructions.

3.4 Storage, Handling and Removal Instructions:

3.4.1

Storage and Handling:

The product should be stored in a clean and safe environment to prevent product
damage. See storage Specifications under Product Specification section.
3.4.2

Removal Instruction:

Tilt the table up approximately 30° and unhook the upper jaw of the clamp from
the table rail.

3.5 Troubleshooting Guide:

This device does not have a troubleshooting guide. For technical support user of
the device shall first contact his or her supplier.

3.6 Device Maintenance:

Make sure that all labels are installed and can be read. Replace labels as
necessary by using a plastic scraper to remove the label. Use an alcohol wipe to
remove any adhesive residue.
Contact us if you need to repair or replace the device by using the information
from the contact details section (1.3).
Document Number: 80028303
Version: B
Secure
Page 14
Issue Date: 27 MAR 2020
Ref Blank Template: 80025118 Ver. E