AMATECH F-AHTMAQ3 Manual De Instrucciones página 13

INSTRUCTIONS FOR USE
c. Make sure the bumpers of the
table clamp make contact with
the surgical table.
NOTE:
If the bumpers do not contact the surgical table, contact your Maquet Service
Representative for assistance.
ADJUSTMENT INSTRUCTIONS:
a. Turn table upside down.
b. Insert ¼" (0.6 cm) Allen wrench into
clamp as shown in figure 6.
Document Number: 80028303
Version: B
Page 13
Issue Date: 27 MAR 2020
Ref Blank Template: 80025118 Ver. E