Tabla De Contenido; General Information - Stiga MP 24 Li Manual De Instrucciones

WARNING!: READ THE INSTRUCTION BOOKLET THOROUGHLY
EN
BEFORE USING THE MACHINE. Keep for future reference
INDEX
1. GENERAL INFORMATION .......................... 1
2. SAFETY REGULATIONS ............................. 2
3. GETTING TO KNOW THE MACHINE ......... 5
3.1 Description of the machine and planned
use ........................................................ 5
3.2 Safety signs .......................................... 5
3.3 Identification label ................................ 6
3.4 Main components ................................. 6
4. ASSEMBLY .................................................. 6
4.1 Assembly components ......................... 7
4.2 Assembly of the guide bar and toothed
chain ..................................................... 7
4.3 Fitting the pruner device ...................... 7
4.4 Extension of pruner device ................... 7
4.5 Removing the pruner device ............... 7
5. CONTROLS ................................................. 7
5.1 throttle control lever .............................. 7
5.2 Throttle brake button ............................ 8
6. USING THE MACHINE ................................ 8
6.1 Preparation ........................................... 8
6.2 Safety checks ....................................... 8
6.3 Startup .................................................. 9
6.4 Operation .............................................. 9
6.5 Stop .................................................... 10
6.6 After operation .................................... 10
7. ROUTINE MAINTENANCE ........................ 10
7.1 General information ............................ 10
7.2 Battery ................................................ 10
7.3 Topping up the chain oil tank ...............11
7.4 Cleaning ..............................................11
7.5 Chain catcher ......................................11
7.6 Nuts and bolts .....................................11
8. STORING THE MACHINE ......................... 12
8.1 Storing the machine ........................... 12
8.2 Storing the battery .............................. 12
9. HANDLING AND TRANSPORTATION ...... 12
10. ASSISTANCE AND REPAIRS .................... 12
11. WARRANTY COVERAGE ......................... 12
12. MAINTENANCE TABLE ............................. 13
13. CHAIN MAINTENANCE TABLE ................. 13
14. PROBLEM IDENTIFICATION..................... 13
15. ACCESSORIES ON REQUEST ................. 15
15.1 Batteries ............................................. 15
15.2 Battery charger ................................... 15

1. GENERAL INFORMATION

1.1 HOW TO READ THE MANUAL
Some paragraphs in the manual contain
important information regarding safety and
operation and are emphasized in this manner:
NOTE or IMPORTANT these give details
or further information on what has already been
said, and aim to prevent damage to the machine.
The symbol highlights danger.
Non-compliance with the warning
could lead to personal and/or third
party injury and or damage.
The paragraphs highlighted in a square
with grey spots indicate the optional
characteristics not on all models
documented in this manual. Check if
the characteristic is on this model.
Whenever reference is made to a
position on the machine "front", "back",
"left" or "right" hand side, this refers to
the operator's working position.
1.2 REFERENCES
1.2.1 Figures
The figures in these instructions for
use are numbered 1, 2, 3, etc.
Components shown in the figures
are marked A, B, C, etc.
A reference to component C in figure 2 is
written: "See fig. 2.C" or simply "(Fig. 2.C)".
The figures are given as a guide only. The
actual parts may vary from those shown.
1.2.2 Titles
The manual is divided into chapters
and paragraphs. The title of paragraph
"2.1 Training" is a sub-title of "2. Safety
regulations". References to titles or
paragraphs are marked with the abbreviation
chap. or par. and the relevant number.
Example: "chap. 2" or "par. 2.1".
EN - 1