Operating Procedure - Ransomes ZF Serie Instrucciones

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 148
5
OPERATION
GB
5.2

OPERATING PROCEDURE

1.
Under no circumstances should the engine be started without the operator in control of the sweeper.
2.
Do not operate sweeper with loose, damaged or missing components.
3.
First sweep in a test area to become thoroughly familiar with the operation of the sweeper and
traction control levers.
4.
Study the area to determine the best and safest operating procedure. Consider the amount and type
of rubbish, and condition of the surface. Each condition will require certain adjustments or
precautions.
5.
Never direct discharge of material toward bystanders, nor allow anyone near the machine while in
operation. The owner/operator is responsible for injuries inflicted to bystanders and/or damage to
their property.
6.
Disengage the drive motors and raise the brushes when crossing paths or roads. Look out for
traffic.
7.
Stop and inspect the equipment for damage immediately after striking an obstruction or if the
machine begins to vibrate abnormally. Have the equipment repaired before resuming operation.
GB-10
RANSOMES PATHWAY 1200 - TRAILING SEAT
CAUTION
To help prevent injury, always wear safety
glasses, leather work shoes or boots, a
hard hat and ear protection.
CAUTION
Enter a new area cautiously Always
operate at speeds that allow you to have
complete control of the sweeper
WARNING
Before you clean, adjust, or repair this
equipment, always disengage all drives,
lower brushes to the ground, engage
parking brake, stop engine and remove key
from ignition switch to prevent injuries.
SAFETY AND OPERATION
loading

Este manual también es adecuado para:

Lmab692