Maintenance By The User; Cleaning; Disposal - Parkside PDT 40 D3 Traducción Del Manual De Instrucciones Original

Maintenance by the user

Lubrication with the mist oiler:
NOTE
■ A mist oiler continuously and optimally
lubricates the compressed air stapler as a
preparation stage after the pressure reducer.
A mist oiler adds fine drops of oil to air
flowing through the appliance and therefore
guarantees regular lubrication.
♦ Install the mist oiler after the (filter) pressure
reducer. To do this, insert the plug nipple of the
mist oiler into the quick-release coupling of the
(filter) pressure reducer.
♦ Then connect the compressed air appliance
to the quick-release coupling provided for this
purpose.
Manual lubrication
NOTE
■ If you do not have a mist oiler, you must
manually lubricate after the consumption of
approximately 5000 fasteners.
♦ Apply 1–2 drops of compressed air special oil
into the threaded nipple
air stapler.
♦ Then pull the trigger
CAUTION!
► Do not use too much oil, as the oil could
be ejected along with the fastener material
through the opening
damage the workpiece.
■ 42 │ GB│MT
of the compressed
a few times.
and could possibly

Cleaning

■ Do not use any sharp objects for cleaning the
appliance. Do not allow any liquids to get into
the appliance. This can damage the appliance.
■ Clean the appliance regularly, preferably
immediately after completion of the work.
■ Clean the housing with a dry cloth – do NOT
use petrol, solvents or cleaners that can attack
the plastic.
■ Put the compressed air stapler in the supplied
carrying case after each use to protect it from
contamination.

Disposal

The packaging consists of environmentally
friendly material. It can be disposed of in
the local recycling containers.
Do not dispose of the appliance in the normal
domestic waste!
Your local community or municipal authorities
can provide information on how to dispose of the
worn-out appliance.
PDT 40 D3