Gima RS01 Manual De Usuario página 90

Guidance and manufacturer's declaration – electromagnetic immunity – for
EQUIPMENT and SYSTEMS that are not LIFE-SUPPORTING
Guidance and manufacturer's declaration – electromagnetic immunity
The RS01 is intended for use in the electromagnetic environment specified below. The
customer or the user of RS01 should assure that it is used in such an environment.
Immunity test
Conducted RF
IEC 61000-4-6
Radiated RF
IEC 61000-4-3
NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is
affected by absorption and reflection from structures, objects and people.
ENGLISH
IEC 60601 Compliance
test level level
3 Vrms 3 Vrms
150 kHz
to 80 MHz
3 V/m 3 V/m
80 MHz to
2.5 GHz
Electromagnetic
environment – guidance
Portable and mobile RF communica-
tions equipment should be used no
closer to any part of the RS01, includ-
ing cables, than the recommended
separation distance calculated from
the equation applicable to the fre-
quency of the transmitter.
Recommended separation distance
[ ] 3.5
d = √ P
V
1
[ ] 3.5
d = √ P
80 MHz - 800 MHz
E
1
[ ] 7
d = √ P
800 MHz - 2,5 GHz
E
1
Where P is the maximum output pow-
er rating of the transmitter in watts (W)
according to the transmitter manufac-
turer and d is the recommended sep-
aration distance in metres (m).
Field strengths from fixed RF trans-
mitters, as determined by an electro-
magnetic site survey,
than the compliance level in each fre-
quency range.
b
Interference may occur in the vicinity
of equipment marked with the follow-
ing symbol:
42
should be less
a