Record Setup - Gima RS01 Manual De Usuario

13
Callout Function
1 Set Month
2
Set Day
3
Set Hour
4
Set Minute
5 Record
6
Are you sure?
7
Exit
Table 4-2-4
Note: You shall not set up time powering on when the device is in record status.

4.2.5 Record Setup

1) Not in record status,the record setup menu is showed as Figure 4-2-5-1.
It prompts whether to begin record or not. Select YES to exit, it access the
record interface (as Figure 4-2-5-2) to save and the record indicator REC dot
flashes, the "Recorded Times" records the recorded time.
Select NO to exit, it will not record.
Instruction
Month setup, 1~12 can be selected.
Day setup, 1~31 can be selected.
Hour setup, 0~23 can be selected.
Minute setup, 0~59 can be selected.
Record duration setup, 1~10 can be selected
and default is 8, unit:hour.
Confirming information, NO/YES can be selected,
YES: confirm NO: cancel
Exit to the upper-level menu. When exit in YES
status, the setup you have done takes effect.
Figure 4-2-5-1 Starting record menu
Figure 4-2-5-2 Record interface
ENGLISH