Use, Cleaning And Storage; Disposal; Service; Importer - Parkside PBKZ 1 A1 Instrucciones De Uso

Use, cleaning and storage

WARNING!
► Check and clean the goggles before use. Scratched or damaged
protective glasses impair visibility and offer only a reduced protective
effect.
Safety goggles with scratched or damaged protective glasses should
be replaced immediately.
■ Adjust the extensible headband of the safety goggles to fit your head.
■ Ensure that they fit comfortably and securely.
■ When wearing the safety goggles, ensure that they fit comfortably.
■ Use a soft, damp and clean spectacle cleaning cloth to clean the safety
goggles. Never use petrol, solvents or cleansers which can damage
plastic.
■ To disinfect the safety goggles, use only cleaning agents that do not
contain solvents or aggressive substances.
■ Do not exert strong pressure on the surfaces, as this can cause scratches.
■ After use, store and transport the safety goggles in a clean, dry and
UV­proof environment, e.g. in a suitable spectacle case (not supplied).

Disposal

Dispose of the product via an approved waste disposal company
or your municipal waste disposal facility. Comply with all applicable
regulations. Please contact your waste disposal facility if you are
in any doubt.
Dispose of all packaging materials in an environmentally friendly
manner.

Service

Service Great Britain
Tel.: 0800 404 7657
E­Mail: [email protected]
Service Malta
Tel.: 80062230
E­Mail: [email protected]
IAN 352083_2007

Importer

Please note that the following address is not the service address.
Please use the service address provided.
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
44867 BOCHUM
GERMANY
www.kompernass.com

EU Declaration of Conformity

The manufacturer bears sole responsibility for issuing this declaration of
conformity.
We, KOMPERNASS HANDELS GMBH, documents officer:
Mr. Semi Uguzlu, BURGSTR. 21, 44867 BOCHUM, GERMANY, hereby
declare that this product complies with the following standards, normative
documents and EC directives:
PSA Regulation
EU 2016/425
General Product Safety Directive
EU 2001/95/EG
Notified body: DIN CERTCO Society for conformity assessment mbH,
Alboinstrasse 56, 12103 Berlin, Germany
ID number of the CA: 0196
Certificate No .: C6377KOMPERNASS/R0
Applied harmonised standards:
EN 166: 2001
EN 170: 2002
Type designation: Safety goggles PBKZ 1 A1
Year of manufacture: 11–2020
Serial number: IAN 352083_2007
Bochum, 25/11/2020
Semi Uguzlu
­ Quality Manager ­
GB │ MT │
11 ■